Yazar "İpekoğlu, Güven" için listeleme
-
Applicability of friction stir welding to steels
Çam, Gürel; İpekoğlu, Güven; Küçükömeroğlu, Tevfik; Aktarer, Semih Mahmut (International OCSCO World Press, 2017)Purpose: The friction stir welding (FSW) method is widely considered to be one of the most significant developments in joining technology to emerge in the last 30 years. The technique has originally been developed for ... -
Farklı kalınlıktaki AA6061-T6 levhaların sürtünme karıştırma kaynağı için uygun kaynak parametrelerinin belirlenmesi
İpekoğlu, Güven; Akçam, Özgür; Çam, Gürel (Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 2018)Bu çalışmada, dört farklı kalınlıktaki AA6061-T6 levhaların sürtünme karıştırma kaynağı ile hatasız birleştirilebilmesi için kullanılması gereken kaynak parametreleri belirlenmeye çalışılmıştır. Bu amaçla, her bir levha ... -
Formation of weld defects in cold metal transfer arc welded 7075-T6 plates and its effect on joint performance
İpekoğlu, Güven; Çam, Gürel (Institute of Physics Publishing, 2019)This study aims at investigating the formation of weld defects (i.e., pores) and determining the effect of pores on mechanical performance of the AA7075-T6 plate joints produced using cold metal transfer (CMT) gas metal ... -
Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints
İpekoğlu, Güven; Küçükömeroğlu, Tevfik; Aktarer, Semih Mahmut; Sekban, Dursun Murat; Çam, Gürel (Institute of Physics Publishing, 2019)Although friction stir welding (FSW) has widely been applied to aluminum alloys in several industries over the past three decades, it is not yet used in industry for joining of steels. The aim of this study is to characterize ... -
Mechanical properties of friction stir welded St 37 and St 44 steel joints
Küçükömeroğlu, Tevfik; Aktarer, Semih Mahmut; İpekoğlu, Güven; Çam, Gürel (Carl Hanser Verlag, 2018)In this study, the weldability of lower strength St 37 grade steel plate with a higher strength steel plate (i. e., St 44) using the friction stir welding technique has been studied. St 37 grade steel sheets are widely ... -
Microstructural and Mechanical Properties of Friction Stir Welded Nickel-Aluminum Bronze (NAB) Alloy
Küçükömeroǧlu, Tevfik; Şentürk, Erhan; Kara, Levent; İpekoğlu, Güven; Çam, Gürel (Springer, 2016)In this study, the applicability of friction stir welding to cast NAB alloy (i.e., C95800) with a thickness of 9 mm has been investigated. The joint performance was determined by conducting optical microscopy, microhardness ... -
Microstructure and mechanical properties of friction-stir welded St52 steel joints
Küçükömeroğlu, Tevfik; Aktarer, Semih Mahmut; İpekoğlu, Güven; Çam, Gürel (Springer, 2018)The aim of this work is to investigate the mechanical properties and microstructures of friction-stir welded (FSWed) St52 structural steel joints. In this study, St52 steel plates with a thickness of 4 mm were butt-welded ... -
Recent developments in joining of aluminum alloys
Çam, Gürel; İpekoğlu, Güven (Springer, 2017)The mass saving potential of light-weight materials, such as Al alloys, is beneficial for fuel economy and reducing CO2 emissions. However, the wide-spread use of these alloys has been long hindered due to the difficulty ... -
Sürtünme Karıştırma Kaynağıyla Birleştirilen St37/St52 Levhaların Mikroyapı Karakterizasyonu ve Mekanik Özellikleri
İpekoğlu, Güven; Küçükömeroğlu, Tevfik; Aktarer, Semih Mahmut; Sekban, Murat Dursun; Çam, Gürel (2018)Sürtünme Karıştırma Kaynağı (SKK), geçtiğimiz otuz yılda çeşitli endüstrilerde alüminyum alaşımlarına başarı ile uygulanmaktadır. Fakat çeliklerin kaynağında, bu işlemlerde açığa çıkan sıcaklıklara dayanabilecek karıştırıcı ...
