Yazar "Ceritbinmez, Ferhat" için listeleme
-
A comparative study on drillability of Inconel 625 alloy fabricated by wire arc additive manufacturing
Ceritbinmez, Ferhat; Günen, Ali; Gürol, Uğur; Çam, Gürel (Elsevier, 2023)In recent years, the cost-effective wire arc additive manufacturing (WAAM) method is increasingly replacing traditional production methods for Ni-based superalloys. However, the effect of high heat input and elemental ... -
The effect of hexagonal nano boron nitride on mechanical performances and machinability behaviors of basalt fabric reinforced epoxy composites
Gümüş, Fatma Bakal; Ceritbinmez, Ferhat; Yapıcı, Ahmet (SAGE Publications, 2021)The aim of this work is to investigate the effect of the hexagonal nano boron nitride (h-BN) doped epoxy on the mechanical performances and machinability behaviors of basalt fiber (BF) composites. The h-BN has used as a ... -
The effect of nanoparticle additive on surface milling in glass fiber reinforced composite structures
Ceritbinmez, Ferhat; Kanca, Erdoğan; Yapıcı, Ahmet (SAGE Publications, 2021)In this study, the effect of adding nanosize additive to glass fiber reinforced composite plates on mechanical properties and surface milling was investigated. In the light of the investigations, with the addition of MWCNTs ... -
The Effects of Cutting Parameters on the Kerf and Surface Roughness on the Electrode in Electro Erosion Process
Ceritbinmez, Ferhat; Kanca, Erdoğan (Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2021)Bu çalışmada elektro erozyon yöntemi ve Cupro MAX CuCrZr elektrot kullanılarak, ısıl işlem görmüş 60-62 HRC sertliğe sahip soğuk iş takım çeliğinden talaş kaldırma neticesinde meydana gelen elektrot aşınması incelenmiştir. ... -
The Effects of Cutting Parameters Used in Milling X153CrMoV12 Cold Work Tool Steel by End Mills on Surface Roughness and Hardness of The Workpiece
Ceritbinmez, Ferhat; Kanca, Erdoğan (Gazi Üniversitesi, 2022)The goal of this project is to investigate the effect of the spindle speed and feed rate used in milling X153CrMoV12 cold work steel by X5070 blue coated solid carbide end mill on surface roughness and hardness of the ... -
The Effects of Using Brass and Copper Wires on the Cutting Quality of Sleipner Cold Work Steel Cut by WEDM
Ceritbinmez, Ferhat; Kanca, Erdoğan (Journal of Materials and Mechatronics, 2022)Wire electric discharge machining (WEDM) is widely used in dies, punches, aerospace and automotive sectors, since materials with high hardness, and temperature resistant, which are not possible to be cut with conventional ... -
An Investigation of Punching the MWCNTs Doped Composite Plates by Using Different Cutting Profiles
Ceritbinmez, Ferhat; Yapıcı, Ahmet (University of Osijek, 2021)In this study, glass fiber reinforced composite layers which are with and without additives of 0.1 wt.% multi walled carbon nanotubes (MWCNTs) of epoxy were manufactured by vacuum infusion method. Unlike the conventional ... -
Investigation of the wear behavior of FeNi36 alloy cut by WEDM method under different loads
Ceritbinmez, Ferhat; Kanca, Yusuf; Tuna, Ahmet; Kanca, Erdoğan (Emerald Publishing, 2023)PurposeFeNi36 (Invar-36) alloy is widely used in the fabrication of molding tools in aerospace industries but there remains a need to improve its wear and friction performance due to its relatively low hardness. The formation ... -
An investigation on cutting of the MWCNTs doped composite plates by CO2 laser beam
Ceritbinmez, Ferhat; Yapıcı, Ahmet (Emerald Group Publishing Ltd., 2022)Purpose The purpose of this study is to obtain strong materials with multiwall carbon nanotubes (MWCNTs) doped and investigate laser cut of MWCNTs also find the effect of the laser cutting parameters on composite materials. ... -
An Investigation on Cutting of the MWCNTs-Doped Composite Plates by AWJ
Ceritbinmez, Ferhat; Yapıcı, Ahmet (Springer Heidelberg, 2020)In this study, cutting of multi-walled carbon nanotubes (MWCNTs)-doped composite sheets by abrasive water jet machining (AWJM) and the effects of the water jet on cut composite materials were analyzed. The influence of ... -
The mechanical effect of functionalization in laminated composite material
Saraçoğlu, Göksel; Ceritbinmez, Ferhat; Özkan, Vildan; Yapıcı, Ahmet (Emerald Publishing, 2023)PurposeThis study aims to systematically compare the effect of increasing fiber-matrix interface adhesion and matrix toughness in layered composite materials. Design/methodology/approachSilane ((3-glycidyloxypropyl) ... -
MRR, EWR and KERF Analysis in cold work tool steel machining in EDM method by copper and brass electrode
Ceritbinmez, Ferhat; Gökkaya, Elif Simay; Kanca, Erdoğan (Osmaniye Korkut Ata Üniversitesi, 2023)In this study, holes were drilled on the Sleipner cold work tool steel with a hardness of 60-62 HRC by copper and brass electrodes using three different current values (50, 25, 12.5 A), pulse on times (3, 6, 9 μs) and pulse ... -
MWCNTs doped GFRPs drilling: crosscheck among holes obtained by alternative manufacturing methods
Ceritbinmez, Ferhat; Özkan, Vildan; Saraçoğlu, Göksel; Yapıcı, Ahmet (Springer, 2021)In this study, the holes of glass fiber reinforced polymer (GFRP) and multi-walled carbon nanotubes (MWCNTs) doped GFRP composite materials were drilled using abrasive water jet (AWJ), CO2 laser cutting, orbital drilling, ... -
Nanopartikül takviyeli kompozit malzemelerin işlenebilirliğinin araştırılması
Ceritbinmez, Ferhat (İskenderun Teknik Üniversitesi / Mühendislik ve Fen Bilimleri Enstitüsü / Makine Mühendisliği Anabilim Dalı, 2020)Bu çalışmada, farklı malzemelerin en iyi özelliklerini tek bir malzemede toplayıp, fiziksel ve mekanik ihtiyaçları karşılayarak birçok kullanım alanına sahip stratejik malzeme üreterek; nanopartikül takviyesi ile daha ... -
Sleipner soğuk iş takım çeliğinin bakır ve pirinç elektrot kullanılarak elektro erozyon yöntemiyle delinmesinin incelenmesi
Gökkaya, Elif Simay (İskenderun Teknik Üniversitesi / Lisansüstü Eğitim Enstitüsü / Makine Mühendisliği Ana Bilim Dalı, 2023)Soğuk iş takım çelikleri başta kalıpçılık olmak üzere birçok makina ve ekipmanlarında yüksek aşınma dayanımı, tokluk, ısıl işleme uygunluk, boyutsal kararlılık, yüksek sertlik gibi özelliklerinden dolayı endüstride yaygın ... -
Sleipner Soğuk İş Takım Çeliğinin Elektro-Erozyon Tezgahında Bakır Krom Zirkonyum Alaşımı Elektrot ile İşlenmesinde İşleme Parametrelerinin Kerf ve Yüzey Pürüzlülüğü Üzerine Etkisinin İncelenmesi
Ceritbinmez, Ferhat; Yapıcı, Ahmet (Giresun Üniversitesi, 2021)Bu çalışmada 60-62 HRC sertlik değerine sahip Sleipner Soğuk İş Takım Çeliğinden Bakır Krom Zirkonyum Alaşımı Elektrot kullanılarak elektro erozyon işleme (EEİ) yöntemi ile talaş kaldırılmıştır. Bu kapsamda üç farklı boşalım ... -
Surface integrity characteristics in wire-EDM of HfTaTiVZr refractory high entropy alloy
Ceritbinmez, Ferhat; Günen, Ali; Akhtar, Mst Alpona; Patel, Kunjal; Mukherjee, Sundeep; Yünlü, Lokman; Kanca, Erdoğan (Taylor and Francis Ltd., 2022)Refractory high entropy alloys (RHEAs) with multiple principal elements constitute a new paradigm in alloy design and have gained recent interest for advanced technical applications due to their unique properties and ... -
WEDM machining of MoNbTaTiZr refractory high entropy alloy
Günen, Ali; Ceritbinmez, Ferhat; Patel, Kunjal; Akhtar, Mst Alpona; Mukherjee, Sundeep; Kanca, Erdoğan; Karakaş, Mustafa Serdar (Elsevier, 2022)Refractory high entropy alloys (RHEAs) have shown great promise for a multitude of advanced engineering applications due to their high mechanical stability from cryogenic temperatures to 1600 °C. However, the low ductility ... -
Wire electric discharge machining and its effect on the surface finish of HfNbTaTiZr refractory high-entropy alloy
Ceritbinmez, Ferhat; Kanca, Erdoğan; Yünlü, Lokman; Patel, Kunjal; Akhtar, Mst Alpona; Mukherjee, Sundeep; Günen, Ali (Springer, 2023)Refractory high-entropy alloys (RHEAs) have high strength and hardness but limited plasticity at room temperature, making them challenging to process and shape using conventional techniques. In the current study, HfNbTaTiZr ...
