Yazar "Erdoğan, Azmi" için listeleme
-
Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy
Günen, Ali; Döleker, Kadir Mert; Korkmaz, Mehmet Erdi; Gök, Mustafa Sabri; Erdoğan, Azmi (Elsevier, 2021)Nickel-based superalloy Nimonic 80A was pack-borided in a solid medium at temperatures of 850 degrees C and 950 degrees C for 2 h and 4 h using silicon-free boriding powders. To investigate the effects of the boriding ... -
Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy
Günen, Ali; Döleker, Kadir Mert; Korkmaz, Mehmet Erdi; Gök, Mustafa Sabri; Erdoğan, Azmi (Elsevier, 2021)Nickel-based superalloy Nimonic 80A was pack-borided in a solid medium at temperatures of 850 degrees C and 950 degrees C for 2 h and 4 h using silicon-free boriding powders. To investigate the effects of the boriding ... -
Dry sliding wear behavior of bonded hot-work tool steel at elevated temperatures
Gök, Mustafa Sabri; Küçük, Yılmaz; Erdoğan, Azmi; Öge, Mecit; Kanca, Erdoğan; Günen, Ali (Elsevier Science, 2017)In the present study, the surface of AISI H13 hot-work tool steel was bonded with EKabor II powders using powder pack-bonding method. The process was carried out at 800,900 and 1000 degrees C temperatures for 2,4 and 6 h ... -
Enhancing of Tribological, Mechanical and Microstructural Properties of HVOF Coated AISI 316 Steel by Boriding
Erdoğan, Azmi; Günen, Ali; Özbek, Yıldız Yaralı; Gök, Mustafa Sabri (Springer, 2023)Boriding has been attempted to further improve the wear resistance of high-velocity oxygen fuel (HVOF) coatings, often used for corrosion, oxidation or wear resistant applications. For this purpose, different HVOF coatings ... -
Friction and wear behavior of epoxy composite filled with industrial wastes
Erdoğan, Azmi; Gök, Mustafa Sabri; Koç, Vahdettin; Günen, Ali (Elsevier Sci Ltd, 2019)Waste utilization is an important alternative to reduce disposal costs, potential environmental pollution problems, decrement of natural resources and production costs. In this study, it is aimed to create a different usage ... -
High-temperature corrosion and oxidation properties of borided CoCrFeNiAl0.5Nb0.5 HEA
Döleker, Kadir Mert; Özgürlük, Yasin; Gökçekaya, Özkan; Günen, Ali; Erdoğan, Azmi (Elsevier, 2023)This study is focused on a detailed investigation of high-temperature corrosion and oxidation behavior of borided CoCrFeNiAl0.5Nb0.5 HEAs, considering their use in advanced engineering applications. CoCrFeNiAl0.5Nb0.5 HEA ... -
Microstructural characterization, boriding kinetics and tribo-wear behavior of borided Fe-based A286 superalloy
Günen, Ali; Keddam, Mourad; Alkan, Sabri; Erdoğan, Azmi; Çetin, Melik (Elsevier, 2022)Iron-based superalloys are alloys produced for use in corrosive environments as an alternative to high-cost nickel-based superalloys. However, their average strength and hardness, attributed to their austenitic structures, ... -
Microstructure and mechanical properties of borided CoCrFeNiAl0.25Ti0.5 high entropy alloy produced by powder metallurgy
Erdoğan, Azmi; Günen, Ali; Gök, Mustafa Sabri; Zeytin, Sakin (Elsevier, 2021)CoCrFeNiAl0.25Ti0.5 high entropy alloy alloys (HEA), produced by powder metallurgy were subjected to boriding to improve their mechanical properties. Sintering was carried out at 1200 degrees C for 2 h in Ar, and boriding ... -
Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al0.07Co1.26Cr1.80Fe1.42Mn1.35Ni1.10 high entropy alloy
Karakaş, Mustafa Serdar; Günen, Ali; Çarboğa, Cemal; Karaca, Yusuf; Demir, Mehmet; Altınay, Yasemin; Erdoğan, Azmi (Elsevier, 2021)High-entropy alloys (HEAs) with face-centered cubic (FCC) structures exhibit high toughness and corrosion resistance, but their average strengths and relatively low wear resistance can limit their engineering ap-plications. ... -
A new approach to sintering and boriding of steels "Boro-sintering": Formation, microstructure and wear behaviors
Erdoğan, Azmi; Kurşuncu, Bilal; Günen, Ali; Kalkandelen, Müge; Gök, Mustafa Sabri (Elsevier, 2020)In this study, sintering and boriding methods are applied as a single step, and it is aimed to gain time and economic advantage. For this purpose, powder mixtures prepared in suitable compositions were subjected to sintering ... -
Powder-pack boronizing of CoCrFeNiAl0.5Nb0.5 HEA: Modeling of kinetics, microstructural, mechanical, and tribological characterizations
Günen, Ali; Keddam, Murad; Sünbül, Sefa Emre; İçin, Kürşat; Döleker, Kadir Mert; Gök, Mustafa Sabri; Dal, Serkan; Erdoğan, Azmi (Elsevier, 2022)This study is dedicated to the detailed investigation of boronization kinetic, microstructural, mechanical, and wear properties of high entropy alloys (HEAs) considering their sluggish diffusion effect properties. A ...
