dc.contributor.author | İpekoğlu, Güven | |
dc.contributor.author | Çam, Gürel | |
dc.date.accessioned | 2020-05-24T14:24:16Z | |
dc.date.available | 2020-05-24T14:24:16Z | |
dc.date.issued | 2019 | |
dc.identifier.citation | Ipekoǧlu, G., Çam, G. (2019). Formation of weld defects in cold metal transfer arc welded 7075-T6 plates and its effect on joint performance. IOP Conference Series: Materials Science and Engineering. 629(1),012007
https://doi.org/10.1088/1757-899X/629/1/012007 | en_US |
dc.identifier.issn | 1757-8981 | |
dc.identifier.uri | https://doi.org/10.1088/1757-899X/629/1/012007 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12508/1055 | |
dc.description | Pisarenko Institute for Problems of Strength, National Academy of Sciences of Ukraine | en_US |
dc.description | 2nd International Conference on Material Strength and Applied Mechanics, MSAM 2019 -- 27 May 2019 through 30 May 2019 -- -- 153570 | en_US |
dc.description.abstract | This study aims at investigating the formation of weld defects (i.e., pores) and determining the effect of pores on mechanical performance of the AA7075-T6 plate joints produced using cold metal transfer (CMT) gas metal arc welding (GMAW) technique. For this purpose, AA7075-T6 Al-alloy plates with a thickness of 2 mm were joined using CMT welding technique. The microstructural and mechanical properties of the welded plates were investigated by detailed optical microscopy investigations, micro-hardness measurements and tensile tests. A correlation between the joint performance and the formation of porosity in the fusion zone (FZ) was also attempted to show the effect of the presence of large pores on the mechanical behavior of the joint. © Published under licence by IOP Publishing Ltd. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Institute of Physics Publishing | en_US |
dc.relation.isversionof | 10.1088/1757-899X/629/1/012007 | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.subject.classification | Friction stir welding | Research laboratories | Tool pin | en_US |
dc.subject.other | Aluminum alloys | en_US |
dc.subject.other | Defects | en_US |
dc.subject.other | Gas metal arc welding | en_US |
dc.subject.other | Gas welding | en_US |
dc.subject.other | Microhardness | en_US |
dc.subject.other | Strength of materials | en_US |
dc.subject.other | Tensile testing | en_US |
dc.subject.other | Welded steel structures | en_US |
dc.subject.other | Welds | en_US |
dc.subject.other | Cold metal transfers | en_US |
dc.subject.other | Formation of weld | en_US |
dc.subject.other | Gas metal arc welding (GMAW) | en_US |
dc.subject.other | Joint performance | en_US |
dc.subject.other | Mechanical behavior | en_US |
dc.subject.other | Mechanical performance | en_US |
dc.subject.other | Micro-structural | en_US |
dc.subject.other | Microhardness measurement | en_US |
dc.subject.other | Plate metal | en_US |
dc.title | Formation of weld defects in cold metal transfer arc welded 7075-T6 plates and its effect on joint performance | en_US |
dc.type | conferenceObject | en_US |
dc.relation.journal | IOP Conference Series: Materials Science and Engineering | en_US |
dc.contributor.department | Mühendislik ve Doğa Bilimleri Fakültesi -- Makina Mühendisliği Bölümü | en_US |
dc.identifier.volume | 629 | en_US |
dc.identifier.issue | 1 | en_US |
dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US |
dc.contributor.isteauthor | İpekoğlu, Güven | en_US |
dc.contributor.isteauthor | Çam, Gürel | en_US |
dc.relation.index | Scopus | en_US |