Metalurji ve Malzeme Mühendisliği: Recent submissions
Now showing items 61-80 of 158
-
Time-thermo-dynamics of anti-Stokes and Stokes scattering and luminescence in 1-nm silicon nanoparticles: Toward an optical nanorefrigerator
(American Institute of Physics Inc., 2022)The thermodynamics of nanosystems is interesting, as they constitute the transition between the atomistic and solid states. This is empowered by the development of tools to manipulate individual atoms and perform atomistic ... -
Titanium carbide coating to improve surface characteristic, wear and corrosion resistance of spheroidal graphite cast irons
(Elsevier, 2022)In this study, titanium carbide (TiC) coatings were grown on the surface of a spheroidal graphite cast iron (SGI) via thermo-reactive diffusion (TRD) using powder-pack processing at 800 °C, 850 °C and 900 °C for 4 h. The ... -
A novel paraoxon imprinted electrochemical sensor based on MoS(2)NPs@MWCNTs and its application to tap water samples
(Elsevier, 2022)Organophosphorus pesticides are widely utilized in agricultural fertility. However, their long-term accumulations result in serious damage to human health and ecological balance. Paraoxon (PAR) can block acetylcholinesterase ... -
Electrochemical neuron-specific enolase (NSE) immunosensor based on CoFe2O4@Ag nanocomposite and AuNPs@MoS2/rGO
(Elsevier, 2022)Small cell lung cancer (SCLC) is highly associated with the risk of early metastasis. Neuron-specific enolase (NSE), a biomarker of SCLC, is directly related to tumor burden and early diagnosis. This biomarker exists in ... -
Emerging Methods of Monitoring Volatile Organic Compounds for Detection of Plant Pests and Disease
(MDPI, 2022)Each year, unwanted plant pests and diseases, such as Hendel or potato soft rot, cause damage to crops and ecosystems all over the world. To continue to feed the growing population and protect the global ecosystems, the ... -
Microstructural characterization, boriding kinetics and tribo-wear behavior of borided Fe-based A286 superalloy
(Elsevier, 2022)Iron-based superalloys are alloys produced for use in corrosive environments as an alternative to high-cost nickel-based superalloys. However, their average strength and hardness, attributed to their austenitic structures, ... -
Key properties of inorganic thermoelectric materials-tables (version 1)
(IOP Publishing Ltd, 2022)This paper presents tables of key thermoelectric properties, which define thermoelectric conversion efficiency, for a wide range of inorganic materials. The twelve families of materials included in these tables are primarily ... -
Development of ZTO/Ag/ZTO transparent electrodes for thin film solar cells
(Springer, 2022)This article presents the optimization of Zinc Tin Oxide/Silver/Zinc Tin Oxide (ZTO/Ag/ZTO) multilayers to implement them in thin film solar cells as transparent electrodes. To achieve improvements on the performance of ... -
A Comparative Study on Metallographic and Mechanical Properties of Armox 500T Armor Steel Plates Joined Using Different Arc Welding Methods
(Springer, 2022)This study comparatively investigated how the metallographic and mechanical properties of Armox 500T armor steel plates joined with Hybrid Plasma Arc Welding (HPAW), Gas Metal Arc Welding (GMAW), and Cold Metal Transfer ... -
Development of novel inhibitive water-based drilling muds for oil and gas field applications
(Elsevier, 2022)The aim of this study is to develop inhibitive drilling fluid systems generated from waste materials that can contribute to the reduction of potential well instability problems caused by drilling fluid based on rheological ... -
Multipurpose acetic acid functionalized carbazole derivatives: Synthesis, electrochemical properties and electrochromic device applications
(Elsevier, 2022)In this study, synthesis of two multifunctional acetic acid functionalized carbazole bearing monomers; 2-(3,6-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-9H-carbazol-9-yl)acetic acid (M1) and 3,6-dithien-2-yl-9H-carbaz ... -
Application of thermo-chemical electrolytic plasma technology in AISI 316-L stainless steel surface treatment
(Gazi Üniversitesi, 2022)Electrolytic Plasma Technology has been used to improve the surface properties of AISI-316L Steel. Electrolytes were selected from water-soluble inorganic salts containing interstitial elements such as N and C. High ... -
The Improving of B2 Aluminium Composite Panel Core Material With Eloxal Sludge By Using Recycling Process
(Technical University of Kosice, 2022)In this study, it is aimed to improving core material by using eloxal sludge for production B2 composite panel. The calcination study of eloxal sludge which arises from anodic oxidation process has a highest Al2O3 percentage ... -
Industrial scale extrusion performance of cryogenically processed DIN 100 Cr6 and DIN 21NiCrMo2 steels
(CSIC Consejo Superior de Investigaciones Cientificas, 2022)The effects of diferent heat and cryogenic (sub-zero) treatment parameters such as temperature and holding time on the microstructure (amount of retained austenite) and hardness of extrusion molds produced from the 21NiCrMo2 ... -
Investigation of the effect of addition of Ce (Cerium) to Mg-4Sb-2Al alloy produced by high pressure die casting method
(Gazi Üniversitesi, 2022)Purpose: In this study, it was produced with HPDC by adding Cerium rare element to Mg-4Sb-2Al alloy. The effect of Ce on mechanical properties was explained by the theories of microstructural transformation and new phase ... -
Pack-Boriding of Monel 400: Microstructural Characterization and Boriding Kinetics
(Korean Institute of Metals and Materials, 2021)Monel 400 was pack-borided in the temperature range of 1173-1273 K for exposure times of 2-6 h. The boride layers produced on the surface of the alloy were examined by scanning electron microscopy and phase identification ... -
Polarization-based surface enhanced Raman scattering from single colloidal DNA decorated with 3 nm silicon nanoparticles
(American Institute of Physics Inc., 2021)Surface enhanced Raman scattering (SERS), in which sample molecules are placed in the proximity of conducting nanostructures, subjects the molecules to intense electron oscillation (plasmon) field. The intense field, ... -
Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al0.07Co1.26Cr1.80Fe1.42Mn1.35Ni1.10 high entropy alloy
(Elsevier, 2021)High-entropy alloys (HEAs) with face-centered cubic (FCC) structures exhibit high toughness and corrosion resistance, but their average strengths and relatively low wear resistance can limit their engineering ap-plications. ... -
The investigation of microstructure and high temperature mechanical properties of novel Mg-Al-Sn-Ce alloy produced by HPDC
(Taylor and Francis, 2021)Different weight ratios of cerium (0.5, 1 and 2 wt.%) were produced in a controlled atmosphere by High Pressure Die Cast method to Mg-6Al-0.3Mn-1Sn alloy. The influence of cerium on microstructure and high-temperature ... -
Prediction of shrinkage ratio of ZA-27 die casting alloy using artificial neural network, computer aided simulation, and comparison with experimental studies
(Sharif University of Technology, 2021)In cast alloys with a long freezing range such as ZA-27, casting defects like porosity and shrinkage may occur in case of failure to control casting variables. In this study, the role of casting variables in the formation ...
