Basit öğe kaydını göster

dc.contributor.authorSabancıoglu,Mert
dc.contributor.authorÜneş,Fatıh
dc.contributor.authorDemirci, Mustafa
dc.contributor.authorTaşar,Bestami
dc.contributor.authorKaya,Yunus ziya
dc.date.accessioned2025-03-10T09:25:11Z
dc.date.available2025-03-10T09:25:11Z
dc.date.issued2024en_US
dc.identifier.citationSABANCIOĞLU, M., ÜNEŞ, F., DEMIRCI, M., TAŞAR, B., KAYA, Y. Z. (2024). Kıyıya Dik Kum Barlarının Bitiş Noktasının Yapay Zeka Yöntemleriyle Tahmini. Fırat Üniversitesi Mühendislik Bilimleri Dergisi, 36(2),651-659. doi.org/10.35234/fumbd.1410671en_US
dc.identifier.urihttps://dergipark.org.tr/tr/pub/fumbd/issue/84508/1410671
dc.identifier.urihttps://hdl.handle.net/20.500.12508/3312
dc.description.abstractKıyıya dik katı madde sonucu oluşan kumbar parametrelerinin tahmini, kıyı yapılarının tasarımı için oldukça önemlidir. Bu çalışmada, kıyıya dik kum barlarının bitiş noktasının kıyı çizgisine olan mesafesi (Xs) tahmini için deneysel veriler kullanılmıştır. Deneylerde 5 farklı ortalama tane çapı d50=0,25, 0,32, 0,45, 0,62 ve 0,80 mm ve 1/8, 1/10 ve 1/15 olmak üzere 3 farklı taban eğimi kullanılmıştır. Bar bitiş noktasının kıyı çizgisine olan mesafesinin tahmini için farklı kıyı eğimleri, farklı tane çaplarındaki kıyı malzemeleri, farklı dalga periyodu ve dalga dikliği girdi parametresi olarak kullanılarak çoklu doğrusal regresyon, destek vektör regresyonu, basit üyelik fonksiyonları ve bulanık kural oluşturma tekniği (Simple Membership Functions and Fuzzy Rule Generation Technique–SMRGT) ve uyarlamalı ağ tabanlı sistemi yöntemleri ile modeller oluşturulmuştur. Model sonuçlarına göre uyarlamalı ağ tabanlı bulanık çıkarım sistemi modelinin diğer iki modele göre daha düşük hata değerleri verdiği ve determinasyon katsayısına göre daha başarılı olduğu görülmüştür.en_US
dc.description.abstractEstimation of sandbar parameters occured by cross-shore sediment transport is very important for the design of coastal structures. In this study, the experimental data utilized to estimate the distance of the ending point of cross-shore sandbars (Xs). In the experiments, 5 different average grain diameters d50=0.25, 0.32, 0.45, 0.62 and 0.80 mm and 3 different base slopes of 1/8, 1/10 and 1/15 were used. Multiple linear regression, Sequential Minimal Optimization algorithm for support vector machine Regression, Simple Membership Functions and Fuzzy Rule Generation Technique (SMRGT) and Adaptive neuro fuzzy inference system were used to estimate the ending point of cross-shore ending bars to the shoreline using input parameters as different coastal slopes, different sediment diameters, different wave periods and wave steepness. According to the model results, it was seen that the adaptive network-based fuzzy inference system model was more successful than the other three models with lower error values and higher coefficient of determination.en_US
dc.language.isoturen_US
dc.publisherFIRAT ÜNİVERSİTESİen_US
dc.relation.isversionof10.35234/fumbd.1410671en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAnfisen_US
dc.subjectÇoklu Doğrusal Regresyonen_US
dc.subjectBulanık Mantıken_US
dc.subjectKıyıya Dik Sediment Taşınımıen_US
dc.subjectBar Parametrelerien_US
dc.subjectSupport Vector Regresyonuen_US
dc.subjectfuzzy logicen_US
dc.subjectanfisen_US
dc.subjectCross-shore sediment transporten_US
dc.subjectbar parameteren_US
dc.subjectmulti linear regressionen_US
dc.subjectsupport vector regression.en_US
dc.titleKıyıya Dik Kum Barlarının Bitiş Noktasının Yapay Zeka Yöntemleriyle Tahminien_US
dc.title.alternativeEstimation of Ending points of Cross-Shore Sandbars using Artificial Inteligence Methoden_US
dc.typearticleen_US
dc.relation.journalFırat Üniversitesi Mühendislik Bilimleri Dergisien_US
dc.contributor.departmentMühendislik ve Doğa Bilimleri Fakültesien_US
dc.identifier.volume36en_US
dc.identifier.issue2en_US
dc.identifier.startpage651en_US
dc.identifier.endpage659en_US
dc.relation.publicationcategoryKonferans Öğesi - Ulusal - Kurum Öğretim Elemanıen_US
dc.contributor.isteauthorSabancıoglu, Mert
dc.contributor.isteauthorÜneş, Fatıh
dc.contributor.isteauthorDemirci, Mustafa
dc.contributor.isteauthorTaşar, Bestami
dc.relation.indexTR-Dizinen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster