dc.contributor.author | Başar, Gökhan | |
dc.contributor.author | Mıstıkoğlu, Selçuk | |
dc.date.accessioned | 12.07.201910:50:10 | |
dc.date.accessioned | 2019-07-12T22:05:56Z | |
dc.date.available | 12.07.201910:50:10 | |
dc.date.available | 2019-07-12T22:05:56Z | |
dc.date.issued | 2019 | |
dc.identifier.citation | Basar, G., Mistikoglu, S. (2019). Cu/Al levhalarin sürtünme kariştirma kaynaǧinda Taguchi metodu ile çekme mukavemeti ve sertlik için optimum kaynak parametrelerinin tahmini. Journal of the Faculty of Engineering and Architecture of Gazi University, 34(3), 1595-1608. doi: 10.17341/gazimmfd.570891 | en_US |
dc.identifier.issn | 1300-1884 | |
dc.identifier.issn | 1304-4915 | |
dc.identifier.uri | https://doi.org/10.17341/gazimmfd.570891 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12508/588 | |
dc.description | WOS: 000469481500036 | en_US |
dc.description | Science Citation Index Expanded | en_US |
dc.description.abstract | In this study, the effect of welding parameters on the performance characteristic in the friction stir welding of Cu/Al plates were experimentally investigated. Experiments were designed according to Taguchi L9 orthogonal array. The evaluation of the experimental results was based on the signal/noise (S/N) ratio. Control factors that given optimum ultimate tensile strength and vickers hardness values determined by using Taguchi method. Three different tool rotational speeds (525, 1025 and 1525 rev/min), tool transverse speeds (50, 75 and 100 mm/min) and tool positions (0, 0.75 and 1.5 mm) as control factors have been selected. Optimal values of variables which were obtained using the S/N ratios were found at the same levels for ultimate tensile strength and hardness. According to the variance analysis results, the most significant variable affecting to ultimate tensile strength and hardness values was determined as tool position. Furthermore, for ultimate tensile strength and hardness values, first degree regression model was created by utilizing MINITAB 17 program. | en_US |
dc.language.iso | tur | en_US |
dc.publisher | Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi | en_US |
dc.relation.isversionof | 10.17341/gazimmfd.570891 | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.subject | Cu | en_US |
dc.subject | Al | en_US |
dc.subject | Taguchi Method | en_US |
dc.subject | Variance Analysis | en_US |
dc.subject | Regression Model | en_US |
dc.subject.classification | Engineering, Multidisciplinary | en_US |
dc.subject.other | Aluminum | en_US |
dc.subject.other | Copper | en_US |
dc.subject.other | Friction | en_US |
dc.subject.other | Friction stir welding | en_US |
dc.subject.other | Regression analysis | en_US |
dc.subject.other | Research laboratories | en_US |
dc.subject.other | Taguchi methods | en_US |
dc.subject.other | Vickers hardness | en_US |
dc.subject.other | L9 orthogonal arrays | en_US |
dc.subject.other | Performance characteristics | en_US |
dc.subject.other | Regression model | en_US |
dc.subject.other | Rotational speed | en_US |
dc.subject.other | Significant variables | en_US |
dc.subject.other | Ultimate tensile strength | en_US |
dc.subject.other | Variance analysis | en_US |
dc.subject.other | Welding parameters | en_US |
dc.subject.other | Tensile strength | en_US |
dc.subject.other | Mechanical-properties | en_US |
dc.subject.other | Copper | en_US |
dc.subject.other | Joints | en_US |
dc.subject.other | Microstructure | en_US |
dc.subject.other | Optimization | en_US |
dc.subject.other | Quality | en_US |
dc.title | Cu/Al levhaların sürtünme karıştırma kaynağında Taguchi metodu ile çekme mukavemeti ve sertlik için optimum kaynak parametrelerinin tahmini | en_US |
dc.title.alternative | Determination of the optimum welding parameters for ultimate tensile strength and hardness in friction stir welding of Cu/Al plates using Taguchi method | en_US |
dc.type | article | en_US |
dc.relation.journal | Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi | en_US |
dc.relation.journal | Journal of the Faculty of Engineering and Architecture of Gazi University | en_US |
dc.contributor.department | Mühendislik ve Doğa Bilimleri Fakültesi -- Makina Mühendisliği Bölümü | en_US |
dc.identifier.volume | 34 | en_US |
dc.identifier.issue | 3 | en_US |
dc.identifier.startpage | 1596 | en_US |
dc.identifier.endpage | 1608 | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.contributor.isteauthor | Mıstıkoğlu, Selçuk | |
dc.relation.index | Web of Science - Scopus - TR-Dizin | en_US |
dc.relation.index | Web of Science Core Collection - Science Citation Index Expanded | |