• Numerical investigation of the combined effects of coating layer properties and specific heat capacities of materials on the heat transfer mechanism in solidification of pure metals 

  Demir, Mehmet Hakan (Research on Engineering Structures and Materials, 2022)

  Mold coating has a critical importance to adjust the microstructure of the cast and regulate the heat transfer during the solidification. The phase change heat transfer problem during the solidification is solved numerically ...

• Comparison of pure-hydrogen production performances of blast furnace slag, and metal powders in sodium borohydride hydrolysis reaction 

  İskenderoğlu, Feride Cansu; Baltacıoğlu, Mustafa (European Mechanical Science, 2022)

  n this study, hydrolysis reaction performances of raw BFS powder and metal powders (which are ingredients of BFS) that are using as a catalyst are compared. Hydrogen generation by hydrolysis reaction of the Al and Fe2O3 ...

• A Systematic Literature Review: Industry 4.0 Based Monitoring and Control Systems in Additive Manufacturing 

  Tartıcı, İdil; Kılıç, Zekai Murat; Bartolo, Paulo (MDPI, 2023)

  first_pagesettingsOrder Article Reprints Open AccessReview A Systematic Literature Review: Industry 4.0 Based Monitoring and Control Systems in Additive Manufacturing by Idil Tartici 1,2,*ORCID,Zekai Murat Kilic 1 ...

• An alternative pathway from hot dry rock to green hydrogen by organic Rankine cycle applications 

  Baltacıoğlu, Mustafa Kaan; Yağlı, Hüseyin; Baydar, Ceyhun; Erdoğan, Yasin (Elsevier, 2023)

  Some researchers have been focused on electricity generation using thermal energy extraction from HDRs via Organic Rankine cycles. This new research topic creates a new pathway to reach green hydrogen for countries that ...

• Recent developments in computer vision and artificial intelligence aided intelligent robotic welding applications 

  Eren, Berkay; Demir, Mehmet Hakan; Mıstıkoğlu, Selçuk (Springer, 2023)

  The welding process, which is an indispensable part of the manufacturing industry, has been in demand for years and continues to attract the attention of researchers. With the transition to Industry 4.0, the welding process ...

• Görüntü İşleme Yoluyla Otonom Tren-Hayvan Kazası Önleme Sistemi 

  Baltacıoğlu, Mustafa; Başar, Mustafa Tunahan; Karaaslan, Muharrem; Özer, Zafer; Öcal, Sefa (Demiryolu Mühendisleri Derneği, 2023)

  Çalışmada tren yolu ulaşımlarında yol güzergâhı üzerinde bulunan hayvan ölümlerinin önlenmesi üzerine odak sağlanmıştır. Hemzemin geçitlerde bulunan bariyer sistemleri raylı ulaşım araçlarının çarpışma kazalarını önleyici ...

• Recent developments in computer vision and artificial intelligence aided intelligent robotic welding applications 

  Eren, Berkay; Demir, Mehmet Hakan; Mıstıkoğlu, Selçuk (Springer, 2023)

  The welding process, which is an indispensable part of the manufacturing industry, has been in demand for years and continues to attract the attention of researchers. With the transition to Industry 4.0, the welding process ...

• Designs of Particle-Swarm-Optimization-Based Intelligent PID Controllers and DC/DC Buck Converters for PEM Fuel-Cell-Powered Four-Wheeled Automated Guided Vehicle 

  Demir, Mehmet Hakan; Demirok, Mehmet (MDPI, 2023)

  For automatic guided vehicles (AGVs), maximizing the operating time with maximum energy efficiency is the most important factor that increases work efficiency. In this study, the fuel-cell-powered AGV (FCAGV) system was ...

• Detection of underway gaps in rail systems by simulative and experimental methods 

  Başar, Mustafa Tunahan; Baltacıoğlu, Mustafa Kaan (SAGE Publications, 2023)

  In this study, simulation and experimental studies have been carried out to determine the gaps formed under the rail line in rail transportation. In the simulations, where the analyzes are carried out with the finite element ...

• Technoeconomic Analysis of Fuel Cell Vehicle-to-Grid (FCV2G) System Supported by Photovoltaic Energy 

  İnci, Mustafa (Wiley, 2023)

  The investigation of fuel cell vehicles (FCVs) connected to grid (FCV2G) technology regarding the reduction of consumer costs is proposed. Herein, the key contribution is to investigate the energy and profit analysis aspects ...

• Energy, exergy, and exergoeconomic analysis of a general UAV 

  Mert, Suha Orçun; Demir, Mehmet Hakan; Demir, Habibe Gürsoy; Kök, Ceyda (Inderscience Publishers, 2023)

  A 3E - energy, exergy, exergoeconomic - analysis of a rotary wing UAV that is used for general purpose has been accomplished in this study. In the study, a parametric investigation regarding the velocity, altitude and ...

• Improved drift-free P&O MPPT method to enhance energy harvesting capability for dynamic operating conditions of fuel cells 

  Büyük, Mehmet; İnci, Mustafa (Elsevier, 2022)

  The current study introduces an improved MPPT algorithm to enhance energy harvesting capacity for momen-tary operating situations of FC. The proposed drift-free MPPT is employed to eliminate the situation caused by an ...

• Design of intelligence-based optimized adaptive fuzzy PID controllers for a two chamber microbial fuel cell 

  Eren, Berkay; Demir, Mehmet Hakan (Wiley, 2022)

  The output voltage of microbial fuel cells (MFCs) needs to be controlled effectively to improve the operating efficiency of MFC system against the load variations, disturbances, and uncertainties. The output voltage control ...

• Design and Analysis of Quadratic Boost Converter with Inductor-Capacitor-Diode Voltage Multiplier Circuit 

  İnci, Mustafa (European Journal of Technique, 2021)

  In the current study, design and analysis of quadratic boost dc-dc converter with a voltage multiplier are presented. An additional inductor-capacitor-diode circuit is implemented as a voltage multiplier in the designed ...

• Esnek Robot Kol Sistemi İçin LQR Denetleyici Parametrelerinin Metasezgisel Algoritmalar Kullanılarak Belirlenmesi 

  Özkaya, Semih; Conker, Çağlar; Bilgiç, Hasan Hüseyin (Konya Mühendislik Bilimleri Dergisi, 2021)

  Sunulan çalışma, bir esnek robot kol sisteminin hareket kontrolüne yönelik LQR denetleyici tasarımı ile kontrol parametrelerinin optimizasyonu hakkında ayrıntılı analizler sunmaktadır. Optimizasyonun temel amacı esnek robot ...

• An autonomous hydrogen production system design based on the solid chemical hydride 

  İskenderoğlu, Feride Cansu; Baltacıoğlu, Mustafa Kaan; Conker, Çağlar; Bilgiç, Hasan Hüseyin (European Mechanical Science, 2022)

  This paper develops a hydrogen generator prototype that is for fuel cell systems used in portable applications. This generator is designed based on the use of solid-state hydrides with high hydrogen storage capacity in the ...

• Design and analysis of a high energy efficient multi-port dc-dc converter interface for fuel cell/battery electric vehicle-to-home (V2H) system 

  Savrun, Murat Mustafa; İnci, Mustafa; Büyük, Mehmet (Elsevier, 2022)

  In this study, a novel interface topology called T-type isolated multi-port converter (T-iMPC) is proposed for integrating multi electric vehicles (EVs) with energy-consuming homes in DC microgrid. The proposed converter ...

• Integrating electric vehicles as virtual power plants: A comprehensive review on vehicle-to-grid (V2G) concepts, interface topologies, marketing and future prospects 

  İnci, Mustafa; Savrun, Murat Mustafa; Çelik, Özgür (Elsevier, 2022)

  Global factors such as energy consumption and environmental issues encourage the utilization of electric vehicles (EVs) as alternative energy sources besides transportation. Recently, the development of virtual power plants ...

• Sliding mode control for fuel cell supported battery charger in vehicle-to-vehicle interaction 

  İnci, Mustafa; Büyük, Mehmet; Özbek, Necdet Sinan (Wiley, 2022)

  In typical vehicle-to-vehicle (V2V) charging systems, energy transfer is provided from a battery electric vehicle (BEV) to charge the energy storage unit of another BEV. In this study, the utilization of a fuel cell electric ...

• A Review on Wind Power Forecasting Regarding Impacts on the System Operation, Technical Challenges, and Applications 

  Depci, Tolga; İnci, Mustafa; Savrun, Murat Mustafa; Büyük, Mehmet (Wiley, 2022)

  Wind power forecasting's (WPF) technical improvements exhibit that the smooth forecasting of wind power is essential in executing operational management like energy balance, grid reliability, scheduling maintenance, and ...

Daha Fazla