Başlık için Mekatronik Mühendisliği listeleme
Toplam kayıt 76, listelenen: 1-20
-
Active/reactive energy control scheme for grid-connected fuel cell system with local inductive loads
(Pergamon-Elsevier Science, 2020)In the grid interconnection of fuel cells, local reactive loads connected to the electrical systems generate reactive power which deteriorates the power factor in the utility-grids. This situation causes energy losses, ... -
Adaptive neuro-fuzzy inference system combined with genetic algorithm to improve power extraction capability in fuel cell applications
(Elsevier, 2021)This study introduces an improved ANFIS based MPPT method to maximize the power extraction capability of the FC-connected system. The proposed method is tested in a stand-alone system that consists of an FC in the power ... -
Alternative fuelled hybrid electric vehicle (AF-HEV) with hydrogen enriched internal combustion engine
(Elsevier, 2019)In this paper, hybrid electric vehicle (HEV) that powered by hydrogen (H-2) enriched internal combustion (ICE) engine was studied both simulation and experimental. As an alternative fuel, the usage of H-2 as additional ... -
An alternative pathway from hot dry rock to green hydrogen by organic Rankine cycle applications
(Elsevier, 2023)Some researchers have been focused on electricity generation using thermal energy extraction from HDRs via Organic Rankine cycles. This new research topic creates a new pathway to reach green hydrogen for countries that ... -
Analysis and modeling of wireless power transfer supported by quadratic boost converter interfaced fuel cell power source
(Wiley, 2022)This study presents a novel wireless power transfer (WPT) system structure that transmits electrical energy from a fuel cell (FC) stack integrated with a quadratic boost converter (QBC). The main objective of the proposed ... -
An autonomous hydrogen production system design based on the solid chemical hydride
(European Mechanical Science, 2022)This paper develops a hydrogen generator prototype that is for fuel cell systems used in portable applications. This generator is designed based on the use of solid-state hydrides with high hydrogen storage capacity in the ... -
Bulanık Mantık Esaslı Karar Destek Sistemi ile Robot Elin Kuvvet Kontrolü
(Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, 2019)Son yıllarda gelişen teknoloji ile robotlar üzerine yapılan çalışmaların ciddi oranda arttığı gözlenmektedir. Robotik sistemlerde robot el konusu, farklı ihtiyaçlar doğrultusunda farklı kullanım alanlarına yönelik olarak ... -
Comparison of pure-hydrogen production performances of blast furnace slag, and metal powders in sodium borohydride hydrolysis reaction
(European Mechanical Science, 2022)n this study, hydrolysis reaction performances of raw BFS powder and metal powders (which are ingredients of BFS) that are using as a catalyst are compared. Hydrogen generation by hydrolysis reaction of the Al and Fe2O3 ... -
Conceptual design analysis for a lightweight aircraft with a fuel cell hybrid propulsion system
(Taylor and Francis Inc., 2020)With the ever-growing aviation industry, energy researches on aviation have turned to renewable energy sources providing electric propulsion. Fuel cells are one of the most popular sources of power for electric vehicles ... -
Design and analysis of a high energy efficient multi-port dc-dc converter interface for fuel cell/battery electric vehicle-to-home (V2H) system
(Elsevier, 2022)In this study, a novel interface topology called T-type isolated multi-port converter (T-iMPC) is proposed for integrating multi electric vehicles (EVs) with energy-consuming homes in DC microgrid. The proposed converter ... -
Design and Analysis of Dual Level Boost Converter Based Transformerless Grid Connected PV System for Residential Applications
(Ieee, 2019)In this paper, a transformer-less grid-connected PV system using low voltage panels is designed and analyzed for residential applications. For this, dual-level dc-dc boost converter is used to obtain a higher voltage level ... -
Design and analysis of fuel cell vehicle-to-grid (FCV2G) system with high voltage conversion interface for sustainable energy production
(Elsevier, 2021)This study proposes the more effective use of fuel cell (FC) vehicles by providing vehicle-to-grid (V2G) technologies that provide the integration of transportation and electricity networks. The main objective of the current ... -
Design and Analysis of Quadratic Boost Converter with Inductor-Capacitor-Diode Voltage Multiplier Circuit
(European Journal of Technique, 2021)In the current study, design and analysis of quadratic boost dc-dc converter with a voltage multiplier are presented. An additional inductor-capacitor-diode circuit is implemented as a voltage multiplier in the designed ... -
Design and Modeling of Single Phase Grid Connected Fuel Cell System
(Ieee, 2019)In this paper, the design and analysis of a single phase grid-connected fuel cell system is presented. For this, proton exchange membrane fuel cell (PEMFC) is used as an energy generation unit and the system is integrated ... -
Design of intelligence-based optimized adaptive fuzzy PID controllers for a two chamber microbial fuel cell
(Wiley, 2022)The output voltage of microbial fuel cells (MFCs) needs to be controlled effectively to improve the operating efficiency of MFC system against the load variations, disturbances, and uncertainties. The output voltage control ... -
Designs of Particle-Swarm-Optimization-Based Intelligent PID Controllers and DC/DC Buck Converters for PEM Fuel-Cell-Powered Four-Wheeled Automated Guided Vehicle
(MDPI, 2023)For automatic guided vehicles (AGVs), maximizing the operating time with maximum energy efficiency is the most important factor that increases work efficiency. In this study, the fuel-cell-powered AGV (FCAGV) system was ... -
Detection of underway gaps in rail systems by simulative and experimental methods
(SAGE Publications, 2023)In this study, simulation and experimental studies have been carried out to determine the gaps formed under the rail line in rail transportation. In the simulations, where the analyzes are carried out with the finite element ... -
Effect of using Hydroxy - CNG fuel mixtures in a non-modified diesel engine by substitution of diesel fuel
(Elsevier, 2016)In this experimental study, Hydroxy (HHO; Oxy-hydrogen) - CNG (Compressed Natural Gas) fuel mixtures were used as an additional fuels in a non-modified diesel engine via intake manifold by substitution of diesel fuel. Three ... -
Effect of wind turbine designed for electric vehicles on aerodynamics and energy performance of the vehicle
(Serbian Society of Heat Transfer Engineers, 2022)This study aims to generate, independently from the electric network, one part of the electrical energy required in the existing electric vehicles, utilizing the wind energy raised by on-the-go vehicles and thus enhancing ... -
Effects of blast furnace slag (BFS) and cobalt-boron (Co-B) on hydrogen production from sodium boron hydride
(Elsevier, 2021)In the present paper, the blast furnace slag (BFS) supported Co-B catalyst were investigated in detail. The impregnation-chemical reduction method was used while hydrochloric (HCl) acid treated BFS samples (BFS+) were ...
