Başlık için Elektrik-Elektronik Mühendisliği listeleme
Toplam kayıt 262, listelenen: 1-20
-
3D EM data driven surrogate based design optimization of traveling wave antennas for beam scanning in X-band: an application example
(Springer, 2022)In this paper, design and optimization of a microstrip elliptic traveling wave antenna (TWA) are presented for the beam scanning in X-band as an application of 3D data driven surrogate based design optimization technique. ... -
90° degrees Polarization rotator and antireflector using meanderline chiral metamaterials: Analytical and numerical approach
(Elsevier GmbH, 2015)We demonstrate theoretically and numerically a chiral slab that can exhibit optical activity, circular dichroism, and antireflection in detail. Copolar and crosspolar transmitted and reflected waves depending on permittivity, ... -
Absorbing the entire X-band via conductive polymer polyaniline coated Y3Fe5O12/NiFe2O4 hybrid composites
(Springer, 2023)Conductive polymer coated Y3Fe5O12 (YIG)/NiFe2O4 (NFO) hybrid radar absorbing composites were studied in this work. The magnetic YIG and NFO particles were synthesized by sol-gel method, and then covered with a conductive ... -
Accurate Modeling of Antenna Structures by Means of Domain Confinement and Pyramidal Deep Neural Networks
(Institute of Electrical and Electronics Engineers Inc., 2022)The importance of surrogate modeling techniques has been gradually increasing in the design of antenna structures over the recent years. Perhaps the most important reason is a high cost of full-wave electromagnetic (EM) ... -
Accurate Modeling of Frequency Selective Surfaces Using Fully-Connected Regression Model With Automated Architecture Determination and Parameter Selection Based on Bayesian Optimization
(Institute of Electrical and Electronics Engineers Inc., 2021)Surrogate modeling has become an important tool in the design of high-frequency structures. Although full-wave electromagnetic (EM) simulation tools provide an accurate account for the circuit characteristics and performance, ... -
Akaryakıt sektörü için metamalzeme tabanlı sensör tasarımı ve uygulaması
(Kırıkkale Üniversitesi, 2017)Metamalzemelerin sinyal emilimi, anten, sensör, süper lens vb. birçok uygulama alanı bulunmaktadır. Bu çalışmada ise metamalzemelerin sensör alanındaki önemli uygulamalarından birine değinilmiştir. Bu uygulama, akaryakıt ... -
Alignment of transmitters in indoor visible light communication for flat channel characteristics
(Wiley, 2022)Visible light communication (VLC) systems incorporate ambient lighting and wireless data transmission, and the experienced channel in indoor VLC is a major topic that should be examined for reliable communication. In this ... -
Analysis of the control strategies for fuel saving in the hydrogen fuel cell vehicles
(Elsevier, 2018)A hydrogen fuel cell vehicle requires fuel cells, batteries, supercapacitors, controllers and smart control units with their control strategies. The controller ensures that a control strategy predicated on the data taken ... -
Analytical solution proposal for fast numerical algorithm in special structured higher order differential equations
(Scipedia S.L., 2018)We suggest a practical method for obtaining the particular solution of non-homogeneous higher order linear differential equations with constant coefficients. The proposed method can be applied directly and simply to such ... -
Antenna-based microwave absorber for imaging in the frequencies of 1.8, 2.45, and 5.8 GHz
(The International Society for Optics and Photonics (SPIE), 2018)We propose a microwave imaging structure with GSM, ISM, Wi-Fi, and WiMAX operating frequencies at 1.80, 2.45, and 5.80 GHz, respectively. The suggested structure is based on a microwave antenna-inspired absorber with ... -
Applying machine learning approach in recycling
(Springer, 2021)Waste generation has been increasing drastically based on the world’s population and economic growth. This has significantly affected human health, natural life, and ecology. The utilization of limited natural resources, ... -
Artificial intelligence based active and reactive power control method for single-phase grid connected hydrogen fuel cell systems
(Elsevier, 2023)In grid-connected power generation systems, power factor fluctuations caused by non-linear power circuits used between the grid and source should be controlled with the help of voltage source inverters (VSI). In addition, ... -
Artificial neural network approach for locomotive maintenance by monitoring dielectric properties of engine lubricant
(Elsevier, 2019)In this paper, we proposed an approach for locomotive maintenance systems by observing engine lube oil. The mechanical particles in lube oil give information about locomotive engine system condition. The engine lubricant ... -
A Bandpass Frequency Selective Surface Filter for Earth Observation Satellite and Radar Applications
(Çukurova Üniversitesi, 2021)In this paper, a bandpass frequency selective surface filter has been suggested for the satellite and radar applications at X band frequency regime. The study has been conducted both numerically and experimentally in a ... -
Bandwidth Improvement in Bow-Tie Microstrip Antennas: The Effect of Substrate Type and Design Dimensions
(Mdpi, 2020)In this work, the impact of substrate type and design dimensions on bow-tie microstrip antenna performance and bandwidth improvement is presented both numerically and experimentally at 4-8 GHz. The finite integration ... -
Bidirectional DC–DC converter based multilevel battery storage systems for electric vehicle and large-scale grid applications: A critical review considering different topologies, state-of-charge balancing and future trends
(John Wiley and Sons Inc, 2021)The expanding share of renewable energy sources (RESs) in power generation and rise of electric vehicles (EVs) in transportation industry have increased the significance of energy storage systems (ESSs). Battery is considered ... -
Broad band MA-based on three-type resonator having resistor for microwave energy harvesting
(Taylor and Francis Inc., 2017)We proposed metamaterial absorber having multi-type split coin resonator based on resistive loads. The numerical simulation results and experimental measurements indicate that broad band absorption with a ratio over 80% ... -
Broad band metamaterial absorber based on wheel resonators with lumped elements for microwave energy harvesting
(Springer, 2018)A new metamaterial absorber structure is designed and characterized both numerically and experimentally for microwave energy harvesting applications. The proposed structure includes four wheel resonators with different ... -
Broad-band polarization-independent metamaterial absorber for solar energy harvesting applications
(Elsevier, 2017)A novel broad-band polarization-independent with wide-angle metamaterial absorber(MA) is investigated and demonstrated for solar energy harvesting applications. The proposed MA is composed of two metal layers which have ... -
C-shaped split ring resonator type metamaterial antenna design using neural network
(SPIE, 2021)A C-shaped split ring resonator-based metamaterial (MTM) structure placed on a patch antenna is proposed. An artificial neural network (ANN) is applied to design and determine dimensions of an MTM structure that is similar ...
